| Features |
| Device type |
Fiber-optic amplifier |
|
| Device type detail |
Stand-alone |
|
| Dimensions (W x H x D) |
10 mm x 31.7 mm x 72.5 mm |
|
| Housing design (light emission) |
Rectangular |
|
| Sensing range max. |
0 mm ... 190 mm (Proximity system) 1) 2)
0 mm ... 800 mm (Through-beam system) |
3) |
|
| Sensing range |
0 mm ... 160 mm, Proximity system 1) 2)
0 mm ... 700 mm, Through-beam system |
3) |
|
| Type of light |
Visible red light |
|
| Light source |
LED 4) |
|
| Wave length |
632 nm |
|
| Adjustment |
Potentiometer, 8 turns 5) |
|
| Indication |
LED |
|
| Display |
Status LEDs |
|
| 1) |
Object with 90% remission (based on standard white, DIN 5033). |
|
|
| 2) |
LL3-DK06. |
|
|
| 3) |
LL3-TB02. |
|
|
| 4) |
Average service life: 100,000 hat TU = +25 °C. |
|
| 5) |
Sensitivity scale 230° . |
|
| 2 FIBER-OPTIC SENSORS | SICK Product data sheet | 2024-12-12 15:53:32 |
| |
Subject to change without notice |
| |
GLL170-P332 | GLL170 |
| |
|
FIBER-OPTIC AMPLIFIER |
| Mechanics/electronics |
| Supply voltage UB |
10 V DC ... 30 V DC 1) |
|
| Ripple |
≤ 10 % 2) |
|
| Current consumption |
30 mA 3) |
|
| Switching output |
PNP |
|
| Number of switching outputs |
1 |
|
| Switching mode |
Light/dark switching |
|
| Switching modeselector |
Selectable via rotary switch |
|
| Response time |
≤ 250 µs |
4) |
|
| Switching frequency |
2 kHz |
|
| Time functions |
Without time delayoff delay |
|
| Delay time |
Selectable via rotary switch, 0 ms ... 40 ms |
|
| Connection type |
Cable, 3-wire, 2 m 5) |
|
| Cable material |
Plastic, PVC |
|
| Conductor cross section |
0.2 mm² |
|
| Cable diameter |
Ø 3.8 mm |
|
| Circuit protection |
A 6)
B 7)
C 8)
D 9) |
|
| Protection class |
III |
|
| Weight |
63 g |
|
| Housing material |
Plastic, PC/POM |
|
| Tightening torque, max. |
0.5 Nm |
|
| Enclosure rating |
IP66 10) |
|
| Ambient operating temperature |
–25 °C ... +55 °C |
|
| Ambient temperature, storage |
–40 °C ... +70 °C |
|
| UL File No. |
NRKH2.E300503 & NRKH8.E300503 |
|
| 1) Limit values. |
| 2) May not fall below or exceed UV tolerances. |
| 3) Without load. |
| 4) Signal transit time with resistive load. |
| 5) Do not bend below 0 °C. |
| 6) A = VS connections reverse-polarity protected. |
| 7) B = inputs and output reverse-polarity protected. |
| 8) C = interference suppression. |
| 9) D = outputs overcurrent and short-circuit protected. |
| 10) With correctly attached fibre-optic cable LL3. |
| Safety-related parameters |
| MTTFD |
760 years |
|
| DCavg |
0 % |
|
| Classifications |
| ECLASS 5.0 27270905 |
| 2024-12-12 15:53:32 | Product data sheet FIBER-OPTIC SENSORS | SICK 3 |
| Subject to change without notice |
| GLL170-P332 | GLL170 |
| FIBER-OPTIC AMPLIFIER |
| ECLASS 5.1.4 |
27270905 |
|
| ECLASS 6.0 |
27270905 |
|
| ECLASS 6.2 |
27270905 |
|
| ECLASS 7.0 |
27270905 |
|
| ECLASS 8.0 |
27270905 |
|
| ECLASS 8.1 |
27270905 |
|
| ECLASS 9.0 |
27270905 |
|
| ECLASS 10.0 |
27270905 |
|
| ECLASS 11.0 |
27270905 |
|
| ECLASS 12.0 |
27270905 |
|
| ETIM 5.0 |
EC002651 |
|
| ETIM 6.0 |
EC002651 |
|
| ETIM 7.0 |
EC002651 |
|
| ETIM 8.0 |
EC002651 |
|
| UNSPSC 16.0901 |
39121528 |
|
